Series PPF ALPHA
|
AudioCap Polypropylene & Aluminum Film & Foil PPF Alpha
The PPF Alpha AudioCap is an excellent film & foil capacitor for all audio circuits and power supplies,
a fine upgrade from metalized film. It provides low distortion and long-term reliability and exhibits excellent
electrical and environmental characteristics. Its sonics are clear and clean, the choice wherever accuracy is
important. Its superior build quality provides the designer with high-quality, stability, and long-life in a film &
foil cap seldom available in this price range. The gold-plated OFHC leads provide long-term high reliability
and excellent solderablility, superior to silver wire owing to gold�s non-oxidizing properties.
|
| Capacitance Values: | .22 to 12.0 mfd; call for information on larger values |
| Tolerances: | +/- 10%. Also: 5%, 2%, 1% |
| Working Voltages: | 200, 400, 600V |
| Test Volts: | 2.0 x rated voltage for one minute. |
| Dissipation Factor: | < 0.05% 1.0 - 10.0 mfd @1kHz @ 25o C |
| Insulation Resistance: | >300,000 megohm/mfd; not to exceed 500,000 megohms |
| Operating Temperature Range: | - 55o C to 105o C |
| Temperature Coefficient: | See Capacitance Change vs. Temperature Chart |
| Life Tests: | Rated voltage @85 degrees C for 1000 hrs. |
| Vibration: | Will Meet Mil-C 19978B |
| Lead Material: | Gold-plated OFHC |
|
| Capacitance Change vs Temperature |
% |
| Temperature Degrees Centigrade | |
DIMENSIONS (IN.) - AUDIOCAP PPF ALPHA - AXIAL LEADS, OVAL CASE
| Capacitance in mfd |
200 VDC (h x w x l) |
400 VDC (h x w x l) |
600 VDC (h x w x l) |
| .22 |
.28 x .47 x 1.1 |
.38 x .57 x 1.1 |
.48 x .67 x 1.2 |
| .33 |
.38 x .57 x 1.2 |
.48 x .67 x 1.3 |
.57 x .76 x 1.3 |
| .47 |
.38 x .66 x 1.2 |
.48 x .76 x 1.3 |
.67 x .76 x 1.3 |
| .68 |
.48 x .67 x 1.3 |
.57 x .76 x 1.4 |
.67 x .95 x 1.8 |
| 1.0 |
.57 x .76 x 1.3 |
.67 x .95 x 1.3 |
.76 x 1.1 x 1.8 |
| 2.0 |
.76 x 1.2 x 1.3 |
.86 x 1.1 x 2.0 |
- |
| 3.0 |
.76 x 1.2 x 1.8 |
.90 x 1.1 x 2.1 |
- |
| 4.0 |
.95 x 1.3 x 1.8 |
- |
- |
| 5.0 |
1.1 x 1.4 x 1.8 |
- |
- |
| 6.0 |
1.1 x 1.4 x 1.8 |
- |
- |
| 7.0 |
1.1 x 1.3 x 2.3 |
- |
- |
| 8.0 |
1.1 x 1.4 x 2.3 |
- |
- |
| 9.0 |
1.2 x 1.6 x 2.3 |
- |
- |
| 10.0 |
1.3 x 1.6 x 2.3 |
- |
- |
| 12.0 |
1.4 x 1.6 x 2.3 |
- |
- |
|
| Dissipation Factor vs Temperature |
% |
| Temperature Degrees Centigrade | |
| Voltage Derating vs Temperature |
% |
| Temperature Degrees Centigrade | |
Sizes accurate to +/- .06. Lead diameters: .025" for caps up to 1/2" diameter; .032" for caps up to 3/4" diameter;
.04" for caps 1" and over.
Capacitors are not covered by our warranty if used at over the rated voltage and temperatures.
Please allow 48 hours break-in before judging sonic performance. |
| AudioCap PPF "Alpha" |
 |
|